Home | BE-62 Tube Mixer | 2/8Rack Tube Preamp Rack | BE-arMod | Future Products | Support | Contact
  
 Harold Busby Tarris 1922 - 2012
 
Busby 2/8Rack!
More of a great thing!
 
 
Modular Eight Channel Mic/Instr Preamp

If you don't need the mix function, but want up to eight channels of beautiful all tube mic and instrument input, ask us about our new modular upgrade from the 2Rack. More of a great thing!


The first reviews are in!
 
"...it made me want to play"

Lloyd English, Guitar Player and Musician

I had the pleasure to try out the Busby 2Rack preamp in the studio today. As most guitar players know trying to capture a sound that is inspirational is an elusive quest at best and impossible at worst. In my own meanderings through this journey I only notice that something has changed with equipment when it affects my desire to play and the Busby 2Rack did that, in a very positive way it made me want to play.
 

What impressed me most of all was the direct into the console sound which was transparent while at the same time delivering a controlled and un-muddied warmth that expressed itself in making the Gibson L5 balanced at the bottom end and liquid and crystalline in the top register. We also compared a contemporary Asian solid pressed spruce top single floating hum-bucker arch-top. The 2Rack seemed to melt away the unwanted over brightness and interpreted a crisp, warm, expensive and expressive sounding response out of a guitar that is 1/20th the cost of the L5 and totally stock at time of testing.
 

I would suggest the 2Rack to anyone wanting to add some too often much needed warmth and control to any digital recording environment or to any serious instrumentalist desiring to achieve clarity of auditory vision in that crucial upper percentile that makes the difference between good and great.


I recently had the pleasure of using the Busby BE-22 Tube pre-amplifier. 
It is a very versatile, controllable pre-amp with smooth, even response from the lowest lows to the highest highs. 
By utilizing the input pads, volume, and gain controls in concert you can generate any level of overdrive your heart desires, whether it be for a little edge on a  vocal track or a full blown overdrive guitar. 
 

It has many options to play with on the signal path...which I really like... and is dead quiet.
 

It's smooth top to bottom and the BE-22 is, in my opinion, the best bang for your buck on the market today.

GJR Stuart, Studio owner


On Friday we had the pleasure of receiving a demonstration of the new Busby microphone preamp.
 
First we tested it direct with an active bass pick-up. It sounded great! Donn then used a DI into the pre and blended that signal with the direct signal. That sounded amazing. Our bass player had just been in the studio recording an album where they used an Avalon VT737SP in the session. His immediate reaction was that he wished it would have been a Busby instead! in his words, "The tone was crystal clear!".
 
The second session we listened to was what personally blew me away. Donn played a Martin acoustic through a Neumann TLM67. Unbelievable! Beautiful open top end, defined midrange with an accurate and tight bottom end. It is a great sign when people enter the recording department, turn their heads and ask what recording is playing over the monitor speakers. We had the privilege of telling them it was Donn live in the room next door.
 
We are very excited with the Busby BE-22 Pre and hope to feature the product soon in our store!
 
Cheers,
 
Matt and Mike @ L&M Victoria
Pro Audio & Recording Dept



"The BE-22 2Rack - a wonderfully clean and warm stereo preamp! With its high-fidelity build and genuine all-tube sound, it's clear that the BE-22 was designed to rival the classics. Personally, this preamp would be a go-to for overheads, rooms, and any ribbon microphone."
 
Conrad Hillis
Pro Audio & Recording
Long & McQuade Port Coquitlam, BC

more reviews on 2/8Rack page >>>
Check out the new Busby arMod!
Complete redesign, in and out.
 

We've completely redesigned the circuit and the face plate and case for the modified Akai/Roberts preamps. Check it out by clicking on the image above!


To purchase the BE All-Tube Mixing Console:   

1. Place an Order:  
Please note, there are currently no new orders being taken. Please watch this web site for updates.

DID YOU KNOW?
~ Busby Mixers are hand-crafted ~ Right down to the milling and soldering of every printed circuit board; the milling, finishing, and assembly of the all aluminum chassis; the milling of the solid wood side panels; EVEN the KNOBS are cast in our own shop!
 
Busby Electronics Strives to be the Perfect Cottage Business
 
We strive to stay small enough to get to know all of our customers - and be big enough to provide volume savings to customers and to offer great jobs to friends and associates! Busby "Shops Local" whenever possible.

NEWS:


New 2/8Rack Audio file posted!
March 2011 2/8Rack page
 
CHECK OUT: AUDIO SAMPLES
We've posted preliminary audio samples from our test sessions. Check them out & Let us know what you think.
 
REVIEWS: Look for reviews of the Busby 2Rack on this page and the BE-2/8Rack page.
Email us with Requests for samples you would like to hear.

Get added to our notification list

Email us to stay informed of updates to our web site be notified of new products.

NEW PHOTOS!
Check out photos of boards and chassis.
View pages for the mixer and 2Rack.
It is amazing how close preliminary renderings were of the mixer, when compared to the latest photos of the input module from the mixer!
 
BE-62 Input Module and BE-22 Dual Output Buffter being tested and burned in. Pot hanging off side of preamp is used to establish value of negative feedback circuit. Feedback can be bypassed using front panel switch to provide more gain as well as offer some wonderful overdrive to electric guitar plugged into the mic input using an external DI box.

 
 
All content ©2011/2012 Busby Electronics Inc.